Nano-ceramic agentLQ-F802
Acid nano-ceramic agent LQ-F802
Use at room temperature without phosphorus and heavy metals. Either spray or soak. instead of iron phosphating. Stable adhesion and corrosion resistance, extensive water quality adaptability. Suitable for cold rolled sheet, galvanized sheet, aluminum sheet and zinc-aluminum alloy.
Product Application:
LQ-F802A slotting agent
LQ-F802B slotting agent additive
LQ-F802C supplement
LQ-F802-1 PH regulator
LQ-F802-2 PH regulator
Before adding LQ-F802, ensure that the tank is clean and free of residue, dirt or other chemicals.
Check that the nozzle is not blocked and the Angle is correct. If necessary, clean the entire unit.
Add every 1000 L of tank volume
LQ-F802A 50 L(50KG)
LQ-F802B (9KG)
After the addition of chemicals, the resulting tank PH is about 2-3
Add half of the water into the tank, and then add the LQ-F802A required for the groove, stir well, and then add
Stir in the required LQ-F802B until completely dissolved, then add LQ-F802-1 several times to adjust the PH
Between 3.5-4.5, monitor PH and conductivity at the same time, and finally fill with clean water, stirring to confirm the concentration
Degree.
Storage:
It is recommended to store in a drying room at 4-38 ° C to avoid incompatibility with the products listed in the safety technical instructions
Keep the packaging container closed when not in use. For more information, please contact our sales and service representative.
Note:
1. The working environment should have a good ventilation system
2. Wear protective clothing such as masks and gloves when operating.
3. If it drops into your eyes, please rinse with water for 15 minutes and seek medical attention immediately.
4. If accidentally drops into the mouth, please rinse with water and consult a doctor.
5. In case of skin contact, please rinse with water or wash hands with lye before seeking medical attention.
6. Wash your hands and rinse your mouth with water after work. Please cover it with a lid after use.
Packing specification:
1. This product is packaged as 25KG/ barrel, sealed storage, original factory seal, and transported according to general chemicals.
2, light loading and unloading, to prevent heavy pressure inversion.
