Silane skin film agentLQ-F800
Nano silane skin film agent LQ-F800
No phosphorus, no heavy metals used at room temperature, excellent adhesion, excellent corrosion resistance and rust resistance, easy to operate with a single agent, suitable for different materials of iron surface
Product Description:
Concentration: 1-3%
Temperature: room temperature
Time: 60-120S
PH: 8-9
Instructions:
1. The PH of the new tank is higher than 9, which can be used directly.
2. After degreasing, it is recommended to add anti-rust agent to the second or third washing tank, and adjust the PH at 8-9 to enhance the transition segment
Anti-rust, thus ensuring the anti-rust ability of the bare mold after passivation.
Tank life:
Use a filter to extend the tank life
A filter bag is recommended. Filter bag using mesh less than 25 microns polypropylene needle eye woven bag, too
The filtration rate is 1-2 cycles per hour.
Equipment:
All equipment that comes into contact with LQ-F800 is required to be made of stainless steel (grade 316S16) or lined with PVC or PE.
Safety and Operation:
Before using or handling any substance mentioned in this document, please read and understand the relevant product safety technical instructions.
Storage:
It is recommended to store in a dry room at 4-38 ° C to avoid contact with non-compatible substances listed in the product safety technical instructions. Please keep the packaging container closed when not in use. For more information, please contact our sales and service representative.
Scheduling:
All emissions of substances described in this document must comply with national and local regulations. The on-site tank may contain components other than the supplied product and must be tested prior to discharge.
Note:
1. The working environment should have a good ventilation system.
2. Wear protective clothing such as masks and gloves when operating.
3. If it drops into your eyes, please rinse with water for 15 minutes and seek medical attention immediately.
4. If accidentally drops into the mouth, please rinse with water and consult a doctor.
5. In case of skin contact, please rinse with water or wash hands with lye before seeking medical attention.
6. Wash your hands and rinse your mouth with water after work. Please cover it with a lid after use.
Packing specification
1. This product is packaged as 25KG/ barrel, sealed storage, original factory seal, and transported according to general chemicals.
2, light loading and unloading, to prevent heavy pressure inversion.
