Oil removal film series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
A-301 Acid degreaser |
1.With an excellent combination of synthetic surfactants, strong decontamination, decontamination film, for the subsequent skin film and coating to be fully prepared;
2. Containing compound acid can quickly and fully remove aluminum oxide film; 3. It can avoid the problem of uneven pitting due to extruded oil and insufficient removal of oxide film; 4. Superior chemical balance, long service life |
Oxidation：1-3% Coating：3-5% |
|
A-302 Low foaming acid degreaser |
1.Both oil removal and oxide film function, its low foam characteristics, applied to aluminum profile spray coating production line;
2. Taking into account the environmental requirements of low COD, low bubble and no phosphorus; |
Coating： 3-5% |
|
LQ-A103 Aluminum veneer degreaser |
1.Suitable for aluminum veneer, 6 series profiles;
2. With excellent combination of synthetic surfactants, strong decontamination and oxidation film; 3. Containing complex acid can quickly and fully remove dirt and grease on aluminum and aluminum veneer; 4. Superior chemical balance, long service life. |
Coating：5-8% |
|
LQ-A305 Pickling agent |
1.Selection of environmentally friendly and efficient surfactant configuration, with fast wetting, penetration characteristics
2. Taking into account the environmental requirements of low COD, low bubble and no phosphorus; |
Coating：1-3% |
|
LQ-A306 Acid degreaser |
The enhanced acid degreaser has stronger erosive power and can remove the oxide film faster. |
Coating：1.5-2.5% |
|
LQ-A307 Acid degreaser |
1.With an excellent combination of synthetic surfactants, strong decontamination, decontamination film, for the subsequent skin film and coating to be fully prepared;
2. Containing compound acid can quickly and fully remove aluminum oxide film; 3. It can avoid the problem of uneven pitting due to extruded oil and insufficient removal of oxide film; |
Oxidation：1-3% Coating：3-5% |
Oxidation treatment series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
Alkali etching additive |
When added to the alkali etching tank, it can strengthen the alkali etching effect, reduce the crystallization of aluminum compounds such as aluminum hydroxide, prolong the liquid life of the tank, and save the cost. |
Additive：20-30g/L NaOH：40-70g/L |
|
LQ-A001 Ash removal additive |
1. It has excellent ash removal and film removal effect. (Not suitable for some alloys containing high silicate such as cast aluminum).
2. Long service life of the potion; 3. No corrosion to the material; |
10-20% |
|
LQ-A002 No nitrogen ash removal additive |
1.No nitrogen has excellent ash removal and film removal effect; (Not suitable for some alloys containing high silicate such as cast aluminum).
2. Long service life of the potion; 3. No corrosion to the material; |
15-20% |
|
Coloring stabilizer |
The electrolytic coloring treatment of aluminum with the powder additive of stannous sulfate can fully inhibit the consumption of stannous sulfate and improve the coloring rate and uniformity. |
40~60g/L |
|
LQ-A801 Room temperature hole sealing agent |
It is a professional product for sealing holes after anodizing aluminum alloy for construction, decoration and protection, containing unique sealing salts, stabilizers, accelerators, etc., which can quickly seal microholes on the surface of aluminum alloy, and the sealing quality can meet the requirements of national standards. |
4-6g/L |
|
LQ-A802 Medium and high temperature hole sealing agent |
Aluminum alloy itself and the sealing agent after dyeing, no ash after sealing, no film explosion, smooth wear resistance, sealing quality can meet the requirements of the national standard. |
5-6g/L |
|
No nickel hole sealing agent |
Chemical conversion film series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
C-301 No chromium passivating agent |
1.No washing or after washing, energy saving, environmental protection;
2. Single dose use, simple operation and easy online management; 3. Acid salt spray over 2000H; 4. Vertical and horizontal lines can be used. |
0.6-1.0% |
|
LQ-A700 No chromium passivating agent |
1.Chromium-free conversion film process for surface treatment of aluminum and aluminum alloy sheets and components
2. Can be used as spray paint pretreatment, mainly used for polyester powder coating pretreatment. 3. Soak and spray |
1-4% （It depends） |
|
LQ-A200 chromium passivating agent |
1. It is a chrome agent for aluminum and its alloys
2. The color of the skin film varies from light yellow to dark gold yellow 3. Provide excellent corrosion protection of aluminum and good adhesion of organic coating layer |