Aluminate degreaser A-301
Acid degreaser A-301
Leqin A-301 single agent is simple to use, convenient to control the tank parameters, simplify the field operation process, long service life and reduce waste water discharge, mainly suitable for the horizontal line soaking use of aluminum profile spraying pretreatment and oxidation pretreatment.
Brief introduction:
1, excellent combination of synthetic surfactants, strong decontamination, removal of
oxidation film, for the subsequent skin film and coating fully prepared.
2, the effective leveling of aluminum extrusion film marks, can shorten or even omit alkali
corrosion, improve the processing speed, simplify the process.
3, containing compound acid can quickly and fully remove the aluminum oxide film, so
that it is brighter and better texture after oxidation and coloring treatment.
4. Avoid the problem of uneven pitting due to extruded oil and insufficient
removal of oxide film, resulting in alkali corrosion
5, superior chemical balance, long service life.
Product Overview:
Product type: Acid degreaser
Application: Immersion type
Product Application:
Concentration: Oxidat
ion: 1 ~ 3%
Coating: 3 ~ 5%
Temperature: 20 ~ 30℃
Time: 1 ~ 3, 5 ~ 15 minutes (depending on oil pollution and treatment process)
Equipment:
All equipment that comes into contact with A-301 is required to be made of stainless
steel (grade 316S16) or lined with PVC or PE
Safety and Operation:
Before using and handling any of the substances covered in this document, please read and understand the relevant product
safety technical instructions.
Storage:
It is recommended to store in a drying room at 4-38℃ to avoid contact with non-compatible substances listed in the
product safety technical instructions. Please keep the packaging container closed when not in use. For more information, please
contact our sales and service representative.
Scheduling:
All releases of substances in this document must comply with national and local regulations. Field tanks may contain
components other than those of the supplied product and must be tested prior to discharge.
Precautions:
1. The working environment should have a good ventilation system.
2. Wear protective clothing such as masks and gloves when operating.
3. If accidentally drops into eyes, please rinse with water for 15 minutes and seek medical attention immediately.
4. If accidentally drops into your eyes, rinse your mouth with clean water and seek medical attention.
5. If it comes into contact with your skin, please rinse with water or wash your hands with lye before seeking medical attention.
6. Wash your hands and rinse your mouth with water after work. Please cover it with a lid after use.
Packing specification:
1. This product is packaged as 30KG/ barrel, sealed storage, original factory seal, according to the general chemical transport.
2, light loading and unloading, to prevent heavy pressure inversion.
