Oil and wax removal series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
LQ-A100 Degreaser |
1. Specially designed for anodic oxidation;
2. Can quickly remove the product surface oil; 3. Do not corrode the sandblasting surface and highlight surface of the substrate; 4. Suitable for 5 series, 6 series, 7 series and other series of aluminum alloy, environmental protection, in line with ROHS requirements. |
10-15% |
|
LQ-A101 Degreasing powder |
1. The product is white to light beige powder;
2. Low erosion, no damage to aluminum material; 3. Low foaming, can be used in air mixing and spraying procedures; 4. Does not contain silicate, there will be no silicate film; 5. Surface activator with microbial decomposition. |
3- 7% |
|
LQ-A102 Paraffin remover |
1.No corrosion to high-light mirror aluminum;
2. Strong permeation and dissolution ability; 3. Fast removal of oil and wax, lasting strength; 4. High oil tolerance and long life. |
3-8% |
Chemical polishing additives series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
LQ-A410 Chemical polishing additive |
1.For automatic chemical polishing of aluminum and aluminum alloys;
2. Fast light speed, uniform luster; 3. Good surface effect for mirror and sand surface; 4. Environmental protection, no nitric acid, no yellow smoke, in line with ROHS requirements. |
5-8%
|
|
LQ-A420 Chemical polishing agent to prevent punching |
1.Uniform light, no over corrosion, no air marks, no impact marks;
2. For mirror, sand surface has a good surface effect, polishing stability; 3.Environmental protection, no nitric acid, no yellow smoke, in line with ROHS requirements. |
0.5-2%（Add according to the degree of punching） |
|
LQ-A430 Chemical polishing agent to prevent punching |
1.Uniform light, no over corrosion, no gas marks, no flow marks;
2. For mirror, sand surface has a good surface effect, polishing stability; 3.Environmental protection, no nitric acid, no yellow smoke, in line with ROHS requirements. |
0.2-0.5%（Add according to the degree of flow trace） |
Ash removal additives & hole sealing series products
|
Product Code & Name |
Peculiarity |
Service concentration |
|
LQ-A001 Ash removal additive |
1. It has excellent ash removal and film removal effect. (Not suitable for some alloys containing high silicate such as cast aluminum).
2. Long service life of the potion; 3. No corrosion to the material; |
10-20% |
|
LQ-A002 No nitrogen ash removal additive |
1. No nitrogen has excellent ash removal and film removal effect; (Not suitable for some alloys containing high silicate such as cast aluminum).
2. Long service life of the potion; 3. No corrosion to the material; |
15-20% |
|
LQ-310 Neutralizer |
1.Thoroughly remove the acid, effectively ensure the yield;
2. At the same time of removing acid, it can also thoroughly open the oxide film to make it dye evenly. |
3-10% |
|
LQ-A800 Hole sealing agent |
1.For closed dyeing products, there will be no color flow phenomenon;
2. The sealing agent contains buffer, and the sealing tank liquid has good stability; 3. For high-quality aluminum alloy materials, the sealing effect is excellent, with high light resistance and weather resistance; 4. Wide application range, dyeing film, transparent film, electrolytic coloring film and chemical oxidation film can provide good sealing effect; 5. Sealing products will not cause stains. |
0.7-1.5% |
|
LQ-A500 Room temperature hole sealing ash remover |
1.Free of nickel and other heavy metals;
2. Use at room temperature without heating; 3. Effectively remove the sealing ash; 4. Extending the time can reduce the nickel content on the surface of the oxide film, environmental protection and safety. |
8-15% |